Another 15 useful things to print during a pandemic (announcing results of the 2nd part of our designer contest)

Announcing results of the 2nd part of our designer contest (April 10, 2020)

300 models were added during the second round of this contest, lasting between March 29 and April 7. Together there is already a total of more than 1000 models in the game. All of them were evaluated now.

Winner of the Original Prusa i3 MK3S printer

Creative MinerX is a happy winner of the second round, with his Hexa Dowel Puzzle. This puzzle consists of twelve hexagons, which are connected via thirteen cylindrical pegs. Everything has to fit into the height of a central mounting pole. Even though it seems to be easy at a first glance, you really need to flex your brain to complete it. There is a nice case included, so you don’t lose any of the individual parts. The same designer has some other models worth seeing as well, including similar mental challenges.

Congratulations, and thanks!

Another 15 tips for useful things to print during a pandemic

As usual, we would like to give an honorable mention to some other nice models which caught our eye during evaluation. It’s no secret these models have a good chance of grabbing a prize in the third round. We arranged them into three categories:

Everyday life necessities


Interactive toys


Educational items

We hope 3D designing and printing help you pass the difficult times of this pandemic. If you like any of the models or have some first-hand experience with it already, let the author know via the Print comments section at that particular model. Getting feedback is very motivating and it’s often one of the reasons why the designers share their models with the community.

Lastly, let us once again invite you to the third and last round of this contest focused on Everyday necessities for life during a pandemic. Ten days from now, we will know a winner of the main prize – Original Prusa i3 MK3S printer, but also several other winners, which will divide among themselves a total of 25 kg of Prusament. The deadline for adding your models is April 17, 2020, 23:59 UTC.

Congratulations to the winner, thanks to all participants, and good luck in the upcoming round!

Announcing results of the 1st part of our designer contest (April 1, 2020)

Ten days since the start of our ad hoc designer contest “Everyday necessities for life during a pandemic” it’s time to announce the winner of the first round! We also made a selection of other models that could be handy (not only) during isolation. Some of them can make your life easier, some make it more fun or let you learn something new.

In just ten days, we received more than 700 ideas for various tools, gadgets, and toys, which is totally awesome! Once again you prove that your activeness and creativity have no limits.

In these times, when there is a huge lack of PPE (personal protective equipment) worldwide, the 3D printing community is doing its best to help where it is needed the most. Many of you print protective face shields and also try to come up with other types of protective equipment – we discussed various options in this article and we also explained the potential risks of home-made 3D printed respirators. Also, our homeland, the Czech Republic, was among the first countries which made wearing a face mask required by law. And every day, more countries follow. This is why there are many models, which focus on face masks – either to make them easier to wear or to help with their production (even at home). So, without further ado, let’s take a look at the results.

Winner of Original Prusa i3 MK3S 3D printer

We made a shortlist of potential candidates, and after careful consideration, we decided to give the award to the author of the ‘Face Mask Pozicer‘. It’s simple, but very useful for anyone wearing glasses, either dioptrical or shades. All of us “four-eyed” know how annoying it is to wear a face mask and fog your glasses each time you exhale. This nifty little thing really makes a difference. You can attach it onto any face mask, both fabric or paper. It can be printed very quickly and uses just a small amount of material. If you fill a whole print sheet with them, you can then give away the surplus to your friends or relatives.


Congratulations, and thanks!

Tips for other useful 3D models during a pandemic

The following models deserve at least an honorable mention. Who knows, maybe one of them wins the second round 🙂

We arranged them into three categories:


Everyday life necessities


If you decide to sew your own face mask at home, you will certainly appreciate this handy bias binder. It makes the preparation noticeably simpler and faster. It is currently one of the most popular 3D models in the Czech Republic.



Seniors are the most vulnerable group during the COVID-19 pandemic. And according to all recommendations, we should visit them as little as possible to reduce the risk of spreading the infection. If you are helping your grandparents with medicine preparation, you can use this organizer to prepare everything at once and in advance.



There are a number of attachments/adapters that make it easier to open doors with your forearm. However, this particular tool has the advantage that no screws are needed to mount it, it’s printed quickly and is truly versatile.



A well-designed hook that can be inserted into a case if necessary to protect it from contamination. Otherwise, of course, it helps to operate doors, elevators and other things without touching them with your hand.



Most experts recommend using cashless payments in the current situation. However, if you cannot avoid paying by cash (or, for example, you want to leave a tip), you can install this holder at the door or in the shop.



This gadget will be useful to all workers in bakeries or other shops. It allows you to quickly remove or put on a disposable glove, or alternate between gloves according to the items you are currently working with.



Interactive toys



Educational items

Deadline of the second round, again with Original Prusa i3 MK3S as the main prize, is coming soon. Please upload your models till April 7, 2020. If you didn’t succeed in the first round, don’t worry, there are two more rounds to go. We will pick from all models uploaded so far since the beginning of the contest. For further info please check our blog article. Again, thank you for all your contributions and good luck in the upcoming rounds!


Source link

Show More

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *