MedicalNews

Saremco Dental AG releases CROWNTEC resin for 3D printed permanent dental restorations

Swiss dental resin manufacturer Saremco Dental AG has released a new photopolymer resin for 3D printed permanent restorations such as crowns, inlays, onlays, and veneers. Prior to its release, the CROWNTEC resin was subjected to routine conformity assessment services and premarketing by global certification firm TÜV SÜD, a notified body according to the EU’s Medical Device Directive.

The resin was also the subject of research at the University of Zurich, Switzerland, which showed that the UV-curable CROWNTEC may be a worthy competitor to traditional ceramic dental crowns. The work by the University’s Center of Dental Medicine pitted the resin against three traditional particle-filled composite ceramics in a battle of fracture load testing.

The four materials were used to fabricate a total of 180 samples of dental crowns varying in wall thickness (0.5mm, 1mm, 1.5mm), with the resin 3D printed on an ASIGA system. Thermomechanical loading and fracture testing were performed on the dental crowns using the mechanical property testing facilities available at the university.

Dental crowns with varying wall thicknesses (0.5mm, 1mm, 1.5mm). Image via University of Zurich.
Dental crowns with varying wall thicknesses (0.5mm, 1mm, 1.5mm). Image via the University of Zurich.

Toppling the ceramic throne

Ceramic or porcelain crowns are a popular choice in dentistry due to their resemblance to bone, both in terms of color and texture. Although with lower mechanical properties relative to their gold or silver counterparts, ceramics remain the dental restoration material of choice around the world. For an experimental light-curable resin to surpass classical porcelain dental prosthetics in popularity, it would have to display superior mechanical properties, resemble bone and be affordable. So how did Saremco’s resin stack up?

Fracture testing the resin

The 3D resin clocked in with a Young’s modulus of 4.5GPa, compared to the traditional ceramics which varied between 10 – 15GPa. A lower Young’s modulus means a material is more elastic, so it is less prone to fracture under tensile loading. The traditional ceramics were found to be more brittle and would risk shattering under significant stresses.

The researchers determined the 3D resin had a mean loading force of 1479N for group 1.5mm. Conversely, the traditional ceramics pulled in mean loading forces of 1580N, 1251N and 1516N, meaning the 3D resin could survive a higher brunt force than one of the ceramics without shattering but is not far behind the other two. Naturally, the mean loading force of each material increased with wall thickness as expected. It was determined, then, that the dental resin had approximately equal or preferable relevant mechanical properties to the traditional ceramic crowns found in the dental industry today.

SLA fabricated die and restorations. Photos via University of Zurich.
SLA fabricated die and restorations. Photos via the University of Zurich.

Further details of the study can be found in the paper titled ‘Fracture load of CAD/CAM-fabricated and 3D-printed composite crowns as a function of material thickness’. It is co-authored by Zimmerman M., Ender A., Egli G., Ozcan M., and Mehl A.

Dental resins are required to possess a certain level of toughness and durability as they will be in a constant state of use once applied. Last year, SLA 3D printer manufacturer Formlabs announced its Digital Denture resin, with the qualities necessary for it to be used for direct printed dental prosthetics, at a trade show in Las Vegas. Earlier this year, Formlabs also announced a partnership with BEGO that will allow dental professionals to use BEGO’s new leading dental materials with Formlabs’ resin printers for temporary and permanent restorations.

The nominations for the 2020 3D Printing Industry Awards are now open. Who do you think should make the shortlists for this year’s show? Have your say now. 

Subscribe to the 3D Printing Industry newsletter for the latest news in additive manufacturing. You can also stay connected by following us on Twitter and liking us on Facebook.

Looking for a career in additive manufacturing? Visit 3D Printing Jobs for a selection of roles in the industry.

Featured image shows dental restorations printed with Saremco CROWNTEC resin. Photo via Saremco.



Source link

Tags
Show More

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Close