Reviews

2019 Creality CR-10 V2 Review: 10-Hour Testing

Let’s see what the Creality CR-10 V2 brings to the table.

An Improved and Sturdier Frame

It looks cool, but does it work?

Captions in pictures missing Labeled by Creality as the golden triangle, and first used in Creality’s CR-10 Max version, the improved frame is not to be confused with the famous tourist area in Asia. In this case, the golden triangle refers to the Z-axis brace connecting the top of the frame to the base.

The goal of this design is to give the printer a sturdier frame, reducing vibrations and Z-wobble to ultimately ensure prints have a smooth finish. We did not print any tall objects for the purpose of the 10-hour testing and so we cannot confirm that this design helps give Z-axis consistency.

Feel the Power!

Another feature is the newly added 24V / 350W Mean Well power supply.

It seems that Creality has paid attention to user feedback, addressing the recurring complaint that the heated bed took a long time to reach the desired temperature, as often underperformed at high temperatures, making it inadvisable to print with materials such as ABS. With the newly added power output, this has been tackled — hooray!

We have found the bed to heat up quickly and maintain a consistent temperature.

Advanced Motherboard

According to Creality, the CR-10 V2 is equipped with a new, self-researched, motherboard matched with a TMC 2208 ultra-mute driver. With the upgraded silent stepper driver, the Creality Cr-10 V2 is supposed to operate under 50 dB. We can confirm a smoother printing experience with much less motor noise during prints.

Dual Part Cooling Duct

We didn’t run into any problems here.

Two is better than one, they say. It looks like Creality had that idiom in mind when redesigning the print head for the CR-10 V2. The printer comes with an upgraded hot end and a dual “fang” part cooling duct on its radial blower fan. It’s hard to say whether this is an improvement over the original CR-10, but what we can say is we have noticed positive results in the print quality, and the community agrees that this kind of duct is generally better for more even, thorough cooling.

After testing the printer for approximately 10 hours, we did not encounter filament blockages, and we obtained consistent — though not quite perfect — print results. According to the manufacturer, the cooling improvement is up to 55%, resulting in 10% increase in overall printing precision.

DIY Upgradeable

Creality deliberately left some room for DIY improvements. While the bed leveling still has to be done semi-automatically by turning the screws, the machine now features a space for a BL-Touch bed-leveling probe. We haven’t upgraded the machine ourselves, as the 10-hour testing review is done in the printer’s vanilla state.

Also, the Creality CR-10 V2 allows the user to switch between the default all-metal Bowden extruder, or switch to a direct drive extrusion unit. Depending on your preference — or the intended print job — a Bowden drive can increase the printing speed, whereas a direct drive might handle tricky filaments, such as TPU, better.

More Features

Further features of the Creality CR-10 V2 are:

  • An Ultrabase-like build plate, which we found to provide good adhesion
  • A resume-print function, which we have not yet tested
  • A filament runout sensor, which was also not tested during our 10-hour review

Source link

Tags
Show More

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Close